192.168.11.1 - Router Login Guide

Q: What routers use 192.168.11.1?

Belkin routers and Buffalo AirStation routers commonly use 192.168.11.1 as their default gateway. Some older Apple networking equipment also used this address, though that's rare these days.

Q: What is the default password for 192.168.11.1?

Belkin routers typically don't have a default password at all. The admin panel just opens without one. Buffalo routers usually use admin as the username with either no password or a password printed on the device sticker.

Q: 192.168.11.1 is not loading - what do I do?

Connect to the router's WiFi or plug in a LAN cable first. Then type http://192.168.11.1 with the http:// prefix. If it still won't load, your router might use a different IP address. Check the sticker or run ipconfig on Windows to find out.

192.168.11.1 is the default admin address for Belkin routers and Buffalo AirStation devices. You can access the settings panel by opening this address in a browser while connected to the router's network.

Type `http://192.168.11.1` into your browser's address bar. Belkin routers typically don't require a password on first access, so you should see the admin panel right away.

Quick answer: Connect to the router's network, open a browser and go to http://192.168.11.1. Belkin routers usually have no password. Buffalo routers use admin with either a blank password or the one on the device sticker.

Routers That Use 192.168.11.1

Brand	Username	Password
Belkin	admin	(leave blank)
Buffalo AirStation	admin	(leave blank or check sticker)

Belkin's choice to ship without a password is convenient for first-time setup, but it also means anyone on your network can access the admin panel. Setting a password after your initial login is a good idea.

How to Log In

Connect to the router via WiFi or LAN cable.
Open a browser and type `http://192.168.11.1` into the address bar.
For Belkin routers, leave the password field empty. For Buffalo, check the sticker.
You're now in the admin panel.

If the page doesn't load, make sure you typed the address in the address bar and not the search field. That's a surprisingly common mistake that sends you to Google instead of your router.

Frequently Asked Questions

What routers use 192.168.11.1?

Belkin routers and Buffalo AirStation devices use this address as their default gateway.

What is the default password for 192.168.11.1?

Belkin: no password needed. Buffalo: no password or check the device sticker.

192.168.11.1 is not loading - what do I do?

Connect to the network first, then type `http://192.168.11.1` with the full prefix. If that doesn't help, run `ipconfig` on Windows to check your actual gateway address.

Not sure which address your router uses? Find your router IP address.

See all defaults: Router Default Passwords - Complete List.

If credentials don't work: How to Factory Reset a Router.