Type `http://192.168.100.1` into your browser while connected to the router. For PLDT Fibr, try `admin` / `1234`. For Globe At Home, try `user` / `user` or `admin` / `admin`. Check the sticker on your device if those don't work.
192.168.100.1 is the admin address for PLDT Fibr routers, Globe At Home modems and LPB Piso WiFi machines in the Philippines. You open it in a browser to change your WiFi password, configure the router and manage your connection.
http://192.168.100.1 while on the router's network. PLDT Fibr default is admin / 1234. Globe At Home default is user / user. If neither works, check the sticker on your device.Default Login Credentials by Brand
| Device | Username | Password |
|---|---|---|
| PLDT Fibr (Ultera) | admin | 1234 |
| PLDT Home Prepaid | admin | admin |
| Globe At Home (user) | user | user |
| Globe At Home (admin) | admin | admin |
| LPB Piso WiFi | admin | admin |
| Unknown | admin | Check device sticker |
How to Log In to 192.168.100.1
- Connect your device to the router or modem via WiFi or LAN cable.
- Open any browser and type `http://192.168.100.1` into the address bar.
- A login page appears. Try the credentials from the table above.
- If none work, the password was changed. Check the sticker or do a factory reset.
PLDT Fibr routers have two separate accounts: a regular user account and a full admin account. For WiFi settings, the user account is usually enough. You only need the admin account for advanced settings like port forwarding or DNS changes.
What to Do When 192.168.100.1 Doesn't Load
Not connected to the right network. This is the most common cause. Your device must be on the same network as the router. Check your WiFi connection.
Browser adds https://. Type `http://192.168.100.1` with the full prefix. The admin page doesn't support HTTPS.
PLDT blocks admin access. Some PLDT configurations restrict access to the admin interface. Try the user account (`user` / `user`) first. Sounds obvious, but many people skip this step and go straight to calling support. For full admin access, contact PLDT.
Frequently Asked Questions
What routers use 192.168.100.1?
PLDT Fibr routers, Globe At Home modems and LPB Piso WiFi machines in the Philippines. It's especially common with ISP-supplied equipment.What is the default password for 192.168.100.1?
PLDT Fibr: `admin` / `1234`. Globe At Home: `user` / `user` or `admin` / `admin`. Check your device sticker if those don't work.Why can't I open 192.168.100.1?
Connect to the router's network first and type `http://192.168.100.1` with the `http://` prefix. Some PLDT routers block admin access - try the user account instead.Is 192.168.100.1 the same as 192.168.1.1?
No. They're different addresses for different devices. 192.168.100.1 is common with PLDT and Globe equipment. 192.168.1.1 is used by TP-Link, ASUS and similar brands.The most common global router address is 192.168.1.1 - used by TP-Link, ASUS and D-Link.
For Piso WiFi machines, the admin address is 10.0.0.0.1.
See the complete router default passwords list for all brands.