Digisol Router Login - Admin Access & Default Password

Digisol routers use `192.168.1.1` as the admin address. Default login is `admin` / `1234` on most models. Some older units use `admin` / `admin`.

Digisol is an Indian networking brand that makes budget routers, managed switches and wireless access points. Their routers are commonly found in Indian homes and small offices.

Digisol Default Credentials

Notice the split: WiFi routers use `1234`, DSL and fiber models use `admin`. When in doubt, check the sticker.

How to Log In

1. Connect to the Digisol WiFi. The default network name usually starts with "Digisol" or "DG-".
2. Open a browser and type `http://192.168.1.1` into the address bar.
3. Enter `admin` as username and `1234` as password.
4. If that doesn't work, try `admin` / `admin`.

Changing Your Digisol WiFi Password

1. Log in at `192.168.1.1`.
2. Go to Wireless > Security Settings.
3. Select WPA2-PSK as the encryption type.
4. Enter your new password in the Pre-Shared Key field.
5. Click Apply. All connected devices disconnect.

Troubleshooting

Can't reach 192.168.1.1. Connect to the Digisol WiFi first. If you're on mobile data, the address won't work. Try the full URL: `http://192.168.1.1`.

Password wrong. Check the sticker on the bottom of the router. If someone changed the default, hold the Reset button for 10 seconds to restore factory settings.

DSL modem won't connect. Digisol DSL modems sometimes use `192.168.2.1` instead of `192.168.1.1`. Try both.

Digisol uses the same IP as many other brands. See the full 192.168.1.1 guide.

Full credentials: Router Default Passwords by Brand.

Not sure which IP your router uses? How to find your router IP address.