LPB Piso WiFi machines use `10.0.0.0.1` as their admin address. You log in there to configure pricing, manage sessions, enable pause time and change the WiFi password. LPB is one of the most popular Piso WiFi brands in the Philippines.
Connect to the LPB machine's WiFi network, open a browser and go to `http://10.0.0.0.1`. Login with `admin` / `admin`. If that fails, check the sticker on the unit.
LPB Piso WiFi Default Credentials
| Field | Value |
|---|---|
| Admin IP | 10.0.0.0.1 |
| Alternative IP | 10.0.0.1 (older units) |
| Username | admin |
| Password | admin |
| Protocol | HTTP only |
How to Log In to Your LPB Piso WiFi
- Connect to the LPB machine's WiFi broadcast.
- Open a browser and type `http://10.0.0.0.1` into the address bar.
- Enter `admin` as both username and password.
- You're now in the LPB admin dashboard.
Setting Up LPB Piso WiFi Pause Time
Pause Time is one of the most popular LPB features. It lets customers freeze their session and come back later without losing paid credits.
Here's how to turn it on: log in to the admin panel, go to Time Settings or Session Management, enable Pause Time and set a maximum pause limit. Most operators set this to 1-2 hours. Customers who pause longer than the limit get their session automatically resumed - the timer just keeps going.
Configuring Pricing on LPB Piso WiFi
In the admin panel, go to Coin Settings or Rate Settings. Set the amount of minutes or data each coin denomination gives. Common configurations in the Philippines:
- PHP 1 = 15 minutes
- PHP 5 = 1 hour
- PHP 10 = 2 hours
LPB Piso WiFi Troubleshooting
Can't reach 10.0.0.0.1. Make sure you're connected to the LPB machine's own WiFi network - not your home router. Also try `http://10.0.0.1` if the first address doesn't respond.
Login rejected. Someone changed the password during initial setup. A factory reset (hold the reset button 10 seconds) restores admin/admin.
Machine accepts coins but gives no time. Check coin settings in the admin panel. Also make sure the coin acceptor is clean and properly calibrated.
Frequently Asked Questions
What is the LPB Piso WiFi admin IP?
It's 10.0.0.0.1 on newer units and 10.0.0.1 on older ones. Connect to the machine's network and open `http://10.0.0.0.1`.What is the default password for LPB Piso WiFi?
admin / admin. Check the sticker on the machine if that doesn't work.How do I enable Pause Time on LPB Piso WiFi?
Log in, go to Time Settings, turn on Pause Time and set the maximum duration.How do I reset my LPB Piso WiFi?
Hold the reset button for 10 seconds until the light blinks. Factory settings are restored.Can I access LPB admin from my phone?
Yes. Connect to the LPB network via WiFi and go to `http://10.0.0.0.1` in your mobile browser.Full guide: 10.0.0.0.1 - Piso WiFi Admin Login.
See the dedicated Piso WiFi Pause Time guide for the full setup walkthrough.
For a full overview of how Piso WiFi works: Piso WiFi - Complete Guide.