10.10.10.1 - Router Login & Default Password

Q: What device uses 10.10.10.1?

Certain LPB and Vendo Piso WiFi vending machines use 10.10.10.1 as their admin address. A few ISP-supplied routers in Southeast Asia also use it. You can confirm by checking the sticker on your device.

Q: 10.10.10.1 is not loading - what do I do?

First, make sure you're connected to the machine's WiFi network and not to mobile data or a different router. Then type http://10.10.10.1 with the full http:// prefix in your address bar. Some browsers automatically try https://, which won't work with Piso WiFi machines.

Q: What is the default password for 10.10.10.1?

On most Piso WiFi machines, the default login is admin for both username and password. If that doesn't work, check the label on the machine or reach out to your hardware supplier.

Q: How is 10.10.10.1 different from 10.0.0.1?

Both addresses sit in the 10.0.0.0/8 private range. Different Piso WiFi models ship with different default addresses. Your specific machine's firmware decides which one it uses, so try both if one doesn't respond.

10.10.10.1 is a private IP address that certain Piso WiFi vending machines use as their default admin portal. You'll find it on select LPB, Vendo and ISP-supplied devices in the 10.0.0.0/8 network range.

To access the admin panel, open your browser and type `http://10.10.10.1` into the address bar. Hit Enter while your device is connected to the machine's WiFi. The default login is usually `admin` / `admin`.

Quick answer: Connect to the Piso WiFi machine's network, open a browser and go to http://10.10.10.1. Log in with admin / admin. If the page doesn't load, make sure mobile data is off and you're on the correct WiFi network.

Which Devices Use 10.10.10.1?

Fewer devices use this address compared to popular options like 10.0.0.1 or 10.0.0.0.1. Here's where you'll typically see it:

LPB Piso WiFi machines on select firmware versions
Vendo WiFi machines, mostly older models
ISP routers from a small number of providers in Southeast Asia

Not sure which address your machine uses? Look at the sticker on the back or bottom of the device. You can also run `ipconfig` on Windows or check your WiFi connection details on Android/iOS and look for the Default Gateway entry.

How to Log In to 10.10.10.1

Connect to the machine's WiFi. Your phone, tablet or laptop needs to be on that network. Turn off mobile data so it doesn't interfere.
Open any browser. Chrome, Firefox, Edge and Safari all work fine.
Type the address. Enter `http://10.10.10.1` directly in the address bar. Don't use the search field.
Enter your credentials. Try `admin` / `admin` first. If that fails, check the device label or contact your supplier.

Still can't get the page to load? Make sure you're using the `http://` prefix. Browsers sometimes switch to `https://` on their own, and Piso WiFi machines don't support secure connections.

Default Passwords for 10.10.10.1

Brand / Device	Username	Password
LPB Piso WiFi	admin	admin
Vendo WiFi	admin	admin
Unknown ISP router	admin	Check device label

Managing Piso WiFi at 10.10.10.1

After logging in, the admin panel lets you adjust session pricing, manage pause time settings and monitor connected users. Every firmware version looks slightly different, but the login process stays the same across machines. I've noticed some newer firmware versions also include bandwidth controls in this panel.

If your machine recently stopped responding at 10.10.10.1, try these other common Piso WiFi addresses: 10.0.0.1, 10.0.0.0.1 or 10.1.1.1.

When 10.10.10.1 Does Not Work

Page doesn't load. Your device is probably connected to the wrong network. Switch to the machine's WiFi and disable mobile data.

Login rejected. Someone changed the password from the default. A factory reset brings back `admin` / `admin`, but it also wipes all other settings including pricing and session rules.

Wrong device responds. With multiple machines nearby, double-check that you're connected to the right one. Each machine broadcasts its own WiFi network.

Frequently Asked Questions

What device uses 10.10.10.1?

Certain LPB and Vendo Piso WiFi machines use this address. Check the sticker on your hardware to confirm.

10.10.10.1 is not loading - what do I do?

Connect to the machine's WiFi first, then type `http://10.10.10.1` with the full http:// prefix. Turn off mobile data if you haven't already.

What is the default password for 10.10.10.1?

Most Piso WiFi machines use `admin` / `admin`. If that doesn't work, check the device label.

How is 10.10.10.1 different from 10.0.0.1?

Different Piso WiFi firmware versions ship with different default addresses. Try both if one doesn't respond.