Router Login

10.5.50.1 - Router Login & Default Password

 ·  Router Login
10.5.50.1 - Router Login & Default Password

10.5.50.1 is the admin address for certain Piso WiFi vending machines. Through this portal, operators set prices, manage sessions and adjust pause time settings. The address sits in the private 10.0.0.0/8 range.

To reach the login page, connect to the machine's WiFi, open a browser and type `http://10.5.50.1` into the address bar. The default credentials are `admin` / `admin` on most machines.

Quick answer: Connect to the Piso WiFi network, open a browser and go to http://10.5.50.1. Enter admin / admin as your login. If it doesn't load, try http://10.0.0.1 or http://10.0.0.0.1 instead.

Which Devices Use 10.5.50.1?

This address shows up on a small segment of the Piso WiFi market:

  • LPB Piso WiFi with select hardware and firmware combinations
  • Other Piso WiFi brands that configure non-standard addresses to avoid conflicts on shared networks
It's less common than 10.0.0.1 or 10.0.0.0.1. If you're not sure which address your machine uses, check the label on the device or test each address one by one.

How to Log In to 10.5.50.1

  1. Connect your device to the Piso WiFi machine's WiFi network. Turn off mobile data.
  2. Open a browser. Chrome or any standard browser works fine here.
  3. Type the address. Enter `http://10.5.50.1` directly into the address bar, not the search field.
  4. Log in. Enter `admin` as both username and password. If that fails, check the device label for a custom password.
One thing to watch out for: always use `http://` and not `https://`. Piso WiFi admin panels don't use SSL certificates, so your browser might block the page if it tries to force a secure connection.

Default Login Credentials

DeviceUsernamePassword
LPB Piso WiFiadminadmin
Generic Piso WiFiadminadmin
Custom setupadminCheck device label

Piso WiFi Admin at 10.5.50.1

Once you're inside the admin panel, you can manage the core business settings of your Piso WiFi machine. That includes session rates per minute or per peso, pause time limits, voucher codes and connected users. The exact menu layout depends on which firmware version your machine runs.

For a full overview of what Piso WiFi machines can do, see the Piso WiFi guide.

Other Piso WiFi Admin Addresses to Try

If 10.5.50.1 doesn't respond, your machine probably uses a different default address. Try these in order:

When 10.5.50.1 Does Not Work

Nothing loads. You're on the wrong network. Switch to the machine's WiFi, disable mobile data and try again.

Credentials rejected. The password was changed by someone. A factory reset (hold the reset button for about 10 seconds) restores the default but erases all settings. Write down your pricing config before you reset.

Page loads but looks broken. Try a different browser. In my experience, some older Piso WiFi firmware versions only display correctly in Chrome.

Frequently Asked Questions

What device uses 10.5.50.1?

Select LPB Piso WiFi machines with specific firmware. Check your device label to confirm this is your admin address.

10.5.50.1 is not working - what should I do?

Confirm you're on the machine's WiFi, then type `http://10.5.50.1` with the full prefix. If it still doesn't work, try 10.0.0.1 or 10.0.0.0.1.

What is the default login for 10.5.50.1?

`admin` / `admin` for most Piso WiFi machines. Factory reset if the default was changed.

Can I use 10.5.50.1 from my phone?

Yes. Connect to the machine's WiFi, disable mobile data, open Chrome and type the address into the address bar.