10.1.1.1 is a private IP address that certain Piso WiFi machines and ISP routers use as their admin login page. It's where you go to change settings, manage connected users, and configure the network.
To access it, connect to the device's WiFi, open your browser, and type `http://10.1.1.1` in the address bar. The default username and password are both `admin`.
http://10.1.1.1 in your browser, and log in with admin / admin. If it doesn't load, you're likely on the wrong network or the device uses a different IP address.Which Devices Use 10.1.1.1?
This address is less common than 10.0.0.1 but it shows up across a range of hardware:
- Piso WiFi machines - select models and firmware versions
- LPB Piso WiFi - some hardware configurations
- ISP routers in Southeast Asia - several providers use the 10.1.x.x range
- Corporate and campus networks - network admins sometimes assign 10.1.1.1 to a router or gateway
How to Log In to 10.1.1.1
- Connect to the device's WiFi or plug in a LAN cable. Turn off mobile data.
- Open a browser. Chrome, Firefox, or Edge all work fine.
- Type `http://10.1.1.1` into the address bar. Not the search field, the address bar at the top.
- Enter credentials. `admin` / `admin` for most Piso WiFi machines. For ISP routers, check the label for the printed default password.
Default Passwords for 10.1.1.1 by Device
| Device Type | Username | Password |
|---|---|---|
| Piso WiFi / LPB | admin | admin |
| Generic ISP router | admin | admin or password |
| Custom / enterprise setup | admin | Check device label |
10.1.1.1 for Piso WiFi Operators
If your Piso WiFi machine uses 10.1.1.1 as its admin address, the login process works the same as any other IP. Connect to the machine's WiFi, open a browser, and navigate to `http://10.1.1.1`. From there you can manage pause time settings, session pricing, and connected users.
Running a Piso WiFi business involves more than just the login. The Piso WiFi guide covers everything from hardware selection to daily management.
10.1.1.1 vs. 1.1.1.1: Don't Mix These Up
People confuse these two all the time. 1.1.1.1 is Cloudflare's public DNS server. It's a completely different service on the public internet. 10.1.1.1 is a private IP address that only works on your local network. Typing 1.1.1.1 in a browser takes you to Cloudflare's website, not to your router.
Other Piso WiFi Addresses to Try
If 10.1.1.1 doesn't respond, give these a shot:
- 10.0.0.1 - most common
- 10.0.0.0.1 - LPB and Vendo standard
- 10.10.10.1 - select firmware versions
- 10.5.50.1 - some LPB configurations
When 10.1.1.1 Doesn't Work
Page doesn't load. Your device is on the wrong network or mobile data is still active. Switch to the correct WiFi and disable mobile data.
Login rejected. The password was changed from the default. A factory reset restores `admin` / `admin` but erases all custom settings. Only use it as a last resort.
Address opens a public website. You probably searched for 10.1.1.1 instead of typing it directly into the address bar. Make sure you enter it in the URL field, not in a search engine.